BL300/BL600/BL1200/BL3000 General Purpose Agitators
BL300/BL600/BL1200/BL3000
The series utilizes a maintenance-free brushless motor that was developed to handle demanding agitation situations.
The forward/reverse rotation function allows changing of the rotation direction to completely eliminate the ring-shaped unmixed area that is generated with one-directional agitation. When using tilted-type blades (square cross, propeller, etc.), the axis direction flow will also be reversed, enabling an even better effect to be achieved.
Features
- The exceptional quietness will not interfere with the laboratory environment.
- During the agitation, even if there are changes in viscosity the set rotation speed will be maintained.
- Utilizes a powerful brushless motor that does not generate sparks.
- During agitating work, one-switch operation changes the rotation direction.
- Does not output noise that would adversely affect other equipment, and incorporates measures to prevent mis-operation even when affected by noise.
- Provided with protection equipment such as a current restricting circuit and thermal protector to protect against agitator motor overloading.
Specifications
BL300/BL600/BL1200/BL3000
Applications
BL300：High Viscosity
BL600：Medium to High Viscosity
BL1200： Low to Medium Viscosity
BL3000： Low Viscosity
BL600：Medium to High Viscosity
BL1200： Low to Medium Viscosity
BL3000： Low Viscosity
Rotation Speed
BL300：5～300rpm
BL600：10～600rpm
BL1200：20～1200rpm
BL3000：50～3000rpm
BL600：10～600rpm
BL1200：20～1200rpm
BL3000：50～3000rpm
Maximum Torque
BL300：1.3N･m
BL600：0.7N･m
BL1200：0.3N･m
BL3000：0.1N･m
BL600：0.7N･m
BL1200：0.3N･m
BL3000：0.1N･m
Motor
DC Brushless Motor B Type Insulation 40W
Rotation Control
Feedback Control and Forward/Reverse Rotation Switching (Timer mode, manual)
Forward/Reverse Rotation Timer
5, 10, 20, 30, 45, and 60 sec Setting Switching Possible
Panel Display
Rotation Speed Digital 4 Digits, and Overloading Display; Torque Indicator (1 graduation 20%)
Chuck
φ8mm Collet-type Hand-tightening chuck
Safety Equipment
Current limiting circuit, thermal protector: motor coil temperature 90°C, safety cover
Power Cable
2m Power Cable with 2-pole Grounded Plug
Power Supply and Consumption
Single Phase 100V±10%, Joint Use 50/60Hz, 200VA
Overseas power supply available as an option
Overseas power supply available as an option
Dimensions and Weight
Main Unit: W135mm x D170mm x H211mm (H230mm with safety cover), 2.0Kg (excluding free joint and power cable)
Standard Accessories
Clamp Holder (Type: 21 x 16) 1 piece, Safety Cover
Contact