ExW Series Mini-Plant-Class Flameproof Agitators
ExW300/ExW600/ExW1200
A mini-plant-class flameproof agitator with approximately twice the power (120W) of the Ex flameproof series. With the controller integrated into the main unit, there is no need to place the operating section in a separate room, making installation and layout changes easy. A large safety cover with an interlock is provided as standard.
Features
- The abundant range of Three-One Motor impellers and shafts can be used as they are
- Shafts up to φ12mm can be used, allowing high-viscosity agitation with confidence
- 5-year free long-term warranty for peace of mind *Customer registration required
- Newly designed flameproof housing that does not release an explosion to the outside in the unlikely event that one occurs
- Unlike air-driven types, agitation can be operated while checking the rotation speed
- Equipped with a feedback function that maintains the set rotation speed
- Three models are available to support a wide variety of agitation
- A strong brushless motor is used that does not generate sparks
- The rotation direction can be switched with a single switch during agitation
- Noise that would cause mistaken operation of other equipment is not output, and noise countermeasures are implemented to prevent mistaken operation even when noise is received
- For the overloading protection of the agitation motor, protection equipment including a current restricting circuit and thermal protector are provided
Specifications
ExW Series
Explosion-Proof Standard
Ex db ⅡB T4 Gb (Flameproof Enclosure)
Applicable Hazardous Areas
Zone 1, Zone 2
Applications
ExW300：High Viscosity
ExW600：Medium to High Viscosity
ExW1200：Medium to Low Viscosity
ExW600：Medium to High Viscosity
ExW1200：Medium to Low Viscosity
Rotation Speed
ExW300：5～300rpm
ExW600：10～600rpm
ExW1200：20～1200rpm
ExW600：10～600rpm
ExW1200：20～1200rpm
Rated Torque
ExW300：4.5N･m
ExW600：2.2N･m
ExW1200：1.2N･m
ExW600：2.2N･m
ExW1200：1.2N･m
Motor
DC Brushless Motor, B Type Insulation (130deg C), 120W
Rotation Control
Feedback Control and Forward/Reverse Rotation Switching (Timer mode, manual)
Forward/Reverse Rotation Timer
5, 10, 20, 30, 45, and 60 sec Setting Switching Possible
Panel Display
Rotation Speed Digital 4 Digits and Overload Display; Torque Indicator (1 graduation 20%)
Chuck
φ13mm Drill Chuck *Up to 12mm shafts accepted
Safety Equipment
Current Restricting Circuit, Motor Axis Restricting Protection Circuit, Thermal Protector: Motor Coil Temperature 90deg C, Full-Guard Safety Cover, Interlock Mechanism
Power Cable
3m Class-3 cabtyre cable (3PNCT x 3 cores), outer diameter φ16mm, terminals: R2-4 ring terminals (a grounded rubber plug for operation checking is included *the plug cannot be used in hazardous areas)
Power Supply and Consumption
Single Phase 100V±10%, Joint Use 50/60Hz, 300VA
Dimensions and Weight
W210 x D300 x H245mm (excluding arm rod, etc.), 7Kg (including 1.2kg power cable)
Standard Accessories
Clamp Holder (Type: 21 x 16) 1 piece, Large Safety Cover with Interlock
Contact