TE300/TE600/TE1200 Agitators with Torque Converters
TE300/TE600/TE1200
The Te Series incorporates a slip-ring type strain torque converter in the drive shaft, and displays and outputs the torque value after it has been amplified by the dynamic strain amplifier inside the control box. The agitating equipment can use the torque to carry out outstandingly accurate measurement of the changes in viscosity.
Features
- Carries out precise measurement of the actual load acting on the agitator blade using a strain type torque converter.
- The torque value is output as an analog voltage so that changes in the viscosity can be understood.
- During the agitation, even if there are changes in viscosity the set rotation speed will be maintained.
- Utilizes a powerful brushless motor that does not generate sparks.
- During agitating work, one-switch operation changes the rotation direction.
- Does not output noise that would adversely affect other equipment, and incorporates measures to prevent mis-operation even when affected by noise.
- Provided with protection equipment such as a current restricting circuit and thermal protector to protect against agitator motor overloading.
Specifications
TE300/TE600/TE1200
Applications
TE300：High Viscosity
TE600：Medium to High Viscosity
TE1200：Medium to Low Viscosity
TE600：Medium to High Viscosity
TE1200：Medium to Low Viscosity
Rotation Speed
TE300：5～300rpm
TE600：10～600rpm
TE1200：20～1200rpm
TE600：10～600rpm
TE1200：20～1200rpm
Maximum Torque
TE300：2.0N･m
TE600：1.0N･m
TE1200：0.5N･m
TE600：1.0N･m
TE1200：0.5N･m
Motor
DC Brushless Motor B Type Insulation (130℃) 80W
Rotation Control
Feedback Control and Forward/Reverse Rotation Switching (Timer mode, manual)
Forward/Reverse Rotation Timer
5, 10, 20, 30, 45, 60 sec Setting Switching Possible
Torque Output
Analog Voltage: DC0-5V
Torque meter: 0-1.0N･m or 0-2.0N･m (selected at purchase)
Amplifier display: 3 decimal places (max. 2.0N･m)
Torque meter: 0-1.0N･m or 0-2.0N･m (selected at purchase)
Amplifier display: 3 decimal places (max. 2.0N･m)
Panel Display
Rotation Speed Digital 4 Digits, and Overloading Display; Torque Indicator (1 graduation 20%)
Chuck
φ8mm Collet-type Hand-tightening Chuck
Safety Equipment
Current Restricting Circuit, Thermal Protector: Motor Coil Temperature 90℃, Safety Cover
Power Cable
Main Unit: 2m Power Cable with 2-pole Grounded Plug
Amplifier: AC adapter
Amplifier: AC adapter
Power Supply and Consumption
Main Unit: Single Phase 100V±10%, Joint Use 50/60Hz, 200VA
Amplifier: 100V 12W
Amplifier: 100V 12W
Dimensions and Weight
Main Unit: W135mm x D175mm (excluding arm rod) x H340mm (H360mm with safety cover), 3Kg
Dynamic Strain Amplifier: W120mm x D190mm x H75mm, 930g
Dynamic Strain Amplifier: W120mm x D190mm x H75mm, 930g
Standard Accessories
Clamp Holder (Type: 21 x 16) 1 piece, Safety Cover
Contact