BLh Safety Series High-Power General-Purpose Agitators
BLh300Saf/BLh600Saf/BLh1200Saf/BLh3000Saf
A safety model of the high-output 80W brushless motor agitator that generates twice the torque of the BL Series, equipped with a full-guard safety cover. The interlock function stops rotation when the cover is opened, so that demanding agitation can be carried out safely.
Features
- Large acrylic cover that allows the operation to be observed
- Interlock function
- Large case design that covers both the chuck and the drive shaft
- Realizes twice as much torque in approximately the same size as the previous BL Series, allowing high-viscosity agitation and the use of large blades
- The exceptional quietness will not interfere with the laboratory environment
- During the agitating operation, even if there is a change in the viscosity, the set rotation speed will be maintained
- A strong brushless motor is used that does not generate sparks
- The rotation direction can be switched with a single switch during agitation
- Noise that would cause mistaken operation of other equipment is not output, and noise countermeasures are implemented to prevent mistaken operation even when noise is received
- For the overloading protection of the agitation motor, protection equipment including a current restricting circuit and thermal protector are provided
Specifications
BLh-Saf Series
Applications
BLh300Saf：High Viscosity
BLh600Saf：Medium to High Viscosity
BLh1200Saf：Medium to Low Viscosity
BLh3000Saf：Low Viscosity
BLh600Saf：Medium to High Viscosity
BLh1200Saf：Medium to Low Viscosity
BLh3000Saf：Low Viscosity
Rotation Speed
BLh300Saf：5～300rpm
BLh600Saf：10～600rpm
BLh1200Saf：20～1200rpm
BLh3000Saf：50～3000rpm
BLh600Saf：10～600rpm
BLh1200Saf：20～1200rpm
BLh3000Saf：50～3000rpm
Rated Torque
BLh300Saf：2.6N･m
BLh600Saf：1.3N･m
BLh1200Saf：0.7N･m
BLh3000Saf：0.2N･m
BLh600Saf：1.3N･m
BLh1200Saf：0.7N･m
BLh3000Saf：0.2N･m
Motor
DC Brushless Motor, B Type Insulation (130deg C), 80W
Rotation Control
Feedback Control and Forward/Reverse Rotation Switching (Timer mode, manual)
Forward/Reverse Rotation Timer
5, 10, 20, 30, 45, and 60 sec Setting Switching Possible
Panel Display
Rotation Speed Digital 4 Digits and Overload Display; Torque Indicator (1 graduation 20%)
Chuck
φ8mm Collet-type Hand-tightening Chuck
Safety Equipment
Current Restricting Circuit, Thermal Protector: Motor Coil Temperature 90deg C, Full-Guard Safety Cover, Interlock Mechanism
Power Cable
2m Power Cable with 2-pole Grounded Plug
Power Supply and Consumption
Single Phase 100V±10%, Joint Use 50/60Hz, 200VA
Dimensions and Weight
Main Unit: W144mm x D175mm x H242mm, 2.6Kg (excluding free joint and power cable)
Standard Accessories
Clamp Holder (Type: 21 x 16) 1 piece, Full-Guard Safety Cover
Contact